Jump to content

QuickFit and Quick Release

From Garmin Wiki
(Redirected from Garmin QuickFit)
QuickFit and Quick Release
Garmin QuickFit band latch diagram from Garmin Support
Overview
Type Watch band attachment systems
Category Accessories / Hardware
Availability
Devices Most Garmin smartwatches (system varies by model; see owner's manual)
Related
CIRQA Smart Band, Index Sleep Monitor, UltraFit nylon straps, ComfortFit fabric bands

QuickFit and Quick Release are the two main watch-band attachment systems used on Garmin wearables. They look similar at a glance but are not interchangeable. Garmin documents the difference in its support article Garmin Quickfit and Quick Release Watch Band Difference.[1]

For band compatibility with a specific watch, Garmin refers users to that model's owner's manual.[1]

Comparison

QuickFit Quick Release
Type Garmin proprietary Industry-standard spring-bar style
Sizes 20 mm, 22 mm, or 26 mm 18 mm, 20 mm, 22 mm, or 24 mm
How it attaches Band presses onto a fixed watch pin; a center latch locks it Spring bar with a sliding quick-release pin seats in the watch lugs
How to remove Slide the latch on the band, then pull the band off the pin Slide the quick-release pin inward on the spring bar, then lift the band out
Interchangeable? No — QuickFit and Quick Release bands are not interchangeable with each other[1] No — same restriction

QuickFit

QuickFit attachment: slide the center latch to release; align and press the band onto the watch pin to install.[1]

QuickFit is a Garmin proprietary band design. Compatible bands are offered in 20 mm, 22 mm, or 26 mm widths.[1]

  • Remove: Slide the latch on the underside of the band, then pull the band off the watch pin.
  • Install: Align the band with the watch and press it onto the watch pin until it locks.[1]

QuickFit straps often emboss the QuickFit name and size (for example, "QuickFit [22]") on the underside of the band near the latch.

QuickFit is common on larger outdoor and multisport watches (for example many fenix and epix models), where tool-free swapping between silicone, nylon, and other QuickFit straps is a selling point.

Quick Release

Quick Release attachment: slide the spring-bar pin inward to release or seat the band in the lugs.[1]

Quick Release is an industry-standard band option that Garmin and other manufacturers use. Compatible widths are 18 mm, 20 mm, 22 mm, or 24 mm.[1]

  • Remove / install: Slide the quick-release pin inward on the spring bar, then lift the band out of (or into) the watch lugs.[1]

Unlike QuickFit, the spring bar travels with the strap rather than remaining as a fixed pin on the watch. Many fashion, hybrid, and smaller Garmin watches use this style.

Relation to screenless bands

Some Garmin screenless products also use a quick-release style connection between the sensor module and the fabric loop, rather than QuickFit's latch-on-pin design. For example, the CIRQA Smart Band attaches its module with a watch-like quick-release spring-bar connection (not QuickFit, and not the slide-in puck used by the Index Sleep Monitor).[2]

Garmin also offers fabric and nylon straps that may use either attachment system depending on the watch:

  • UltraFit nylon straps
  • ComfortFit fabric bands

Garmin publishes separate support articles for attaching those strap styles to a compatible watch.[1]

See also

References

Garmin Wiki
A project by GarminRumors.com