Jump to content

QuickFit and Quick Release

From Garmin Wiki
QuickFit and Quick Release
Garmin QuickFit band latch diagram from Garmin Support
Overview
Type Watch band attachment systems
Category Accessories / Hardware
Availability
Devices Most Garmin smartwatches (system varies by model; see owner's manual)
Related
CIRQA Smart Band, Index Sleep Monitor, UltraFit nylon straps, ComfortFit fabric bands

QuickFit and Quick Release are the two main watch-band attachment systems used on Garmin wearables. They look similar at a glance but are not interchangeable. Garmin documents the difference in its support article Garmin Quickfit and Quick Release Watch Band Difference.[1]

For band compatibility with a specific watch, Garmin refers users to that model's owner's manual.[1]

Comparison

QuickFit Quick Release
Type Garmin proprietary Industry-standard spring-bar style
Sizes 20 mm, 22 mm, or 26 mm 18 mm, 20 mm, 22 mm, or 24 mm
How it attaches Band presses onto a fixed watch pin; a center latch locks it Spring bar with a sliding quick-release pin seats in the watch lugs
How to remove Slide the latch on the band, then pull the band off the pin Slide the quick-release pin inward on the spring bar, then lift the band out
Interchangeable? No — QuickFit and Quick Release bands are not interchangeable with each other[1] No — same restriction

QuickFit

QuickFit attachment: slide the center latch to release; align and press the band onto the watch pin to install.[1]

QuickFit is a Garmin proprietary band design. Compatible bands are offered in 20 mm, 22 mm, or 26 mm widths.[1]

  • Remove: Slide the latch on the underside of the band, then pull the band off the watch pin.
  • Install: Align the band with the watch and press it onto the watch pin until it locks.[1]

QuickFit straps often emboss the QuickFit name and size (for example, "QuickFit [22]") on the underside of the band near the latch.

QuickFit is common on larger outdoor and multisport watches (for example many fenix and epix models), where tool-free swapping between silicone, nylon, and other QuickFit straps is a selling point.

Quick Release

Quick Release attachment: slide the spring-bar pin inward to release or seat the band in the lugs.[1]

Quick Release is an industry-standard band option that Garmin and other manufacturers use. Compatible widths are 18 mm, 20 mm, 22 mm, or 24 mm.[1]

  • Remove / install: Slide the quick-release pin inward on the spring bar, then lift the band out of (or into) the watch lugs.[1]

Unlike QuickFit, the spring bar travels with the strap rather than remaining as a fixed pin on the watch. Many fashion, hybrid, and smaller Garmin watches use this style.

Relation to screenless bands

Some Garmin screenless products also use a quick-release style connection between the sensor module and the fabric loop, rather than QuickFit's latch-on-pin design. For example, the CIRQA Smart Band attaches its module with a watch-like quick-release spring-bar connection (not QuickFit, and not the slide-in puck used by the Index Sleep Monitor).[2]

Garmin also offers fabric and nylon straps that may use either attachment system depending on the watch:

  • UltraFit nylon straps
  • ComfortFit fabric bands

Garmin publishes separate support articles for attaching those strap styles to a compatible watch.[1]

See also

References

Garmin Wiki
A project by GarminRumors.com