Jump to content

Step Speed Loss

From Garmin Wiki
Step Speed Loss
Step Speed Loss displayed as a live data field on a Garmin watch (11.4 cm/s in this example), alongside GCT and Cadence
Overview
Introduced May 2025
First Device Forerunner 970
Type Running Dynamics
Availability
Devices Forerunner 970, Fenix 8 series, Fenix 8 Pro, Enduro 3 (requires HRM 600)

Step Speed Loss (often abbreviated SSL) is a Garmin Running Dynamics metric that quantifies how much a runner's forward momentum decreases at each foot strike. Introduced in May 2025 with the Forerunner 970, it underpins higher-level metrics such as Running Economy and provides a granular view of braking efficiency in a runner's stride.[1][2]

SSL is calculated as the difference between a runner's forward speed at footstrike and the minimum forward speed reached during the stance phase of the same step, expressed in centimeters per second (cm/s). Lower values indicate smoother momentum retention and more efficient running form; higher values reflect more braking force and a greater propulsive effort required to recover lost speed.[1][2]

The metric requires the HRM 600 chest strap heart-rate monitor, which contains the accelerometer-derived stride sensors Garmin uses to compute footstrike-level speed data. It is not available with the older HRM-Pro Plus or other earlier heart-rate straps despite their support for traditional Running Dynamics.[3]

How Step Speed Loss Works

Garmin's diagram of a single running stride: SSL is the difference between forward speed at footstrike (top) and minimum forward speed during stance (bottom).

Even during a steady-pace run, a runner's forward velocity is not constant: it dips momentarily when the foot strikes the ground (the braking phase of the stance) and recovers during push-off (the propulsive phase). Step Speed Loss isolates and measures the magnitude of that dip on every stride.[1]

For each step, the watch compares two instantaneous speed readings derived from the HRM 600's accelerometer:

  • Speed at footstrike — the runner's forward velocity at the moment the foot first contacts the ground
  • Minimum speed during stance — the lowest forward velocity reached during that step

The difference between the two values is the Step Speed Loss for that step, reported in cm/s.[2]

Step Speed Loss % (SSL%)

Because absolute SSL values naturally increase at faster running speeds, Garmin also reports Step Speed Loss Percent (SSL%), which expresses SSL as a percentage of overall running speed. SSL% allows direct comparison between easy runs and hard efforts, and across different runners. As with raw SSL, lower SSL% values indicate more efficient momentum retention.[2]

What Affects Step Speed Loss

A runner's biomechanics, terrain, and pace all influence SSL:

Factor Effect on SSL Notes
Overstriding Increases SSL Landing far ahead of the body's center of mass increases braking forces[1]
Low cadence Increases SSL Longer ground contact and bigger speed dip per step
Light, quick footstrikes Decreases SSL Garmin's coaching cues recommend a "lighter, more fluid" stride to reduce SSL[1]
Uphill running Decreases SSL Gravity reduces forward velocity before each strike, so the dip is smaller
Downhill running Increases SSL Gravity accelerates descent, increasing braking on each strike
Running speed Raw SSL increases with pace Use SSL% to normalize across paces[2]
Surface and terrain Variable Trail running, technical surfaces, and sharp turns suppress measurement

Garmin uses the watch's barometric altimeter to account for incline changes outdoors, but treadmill grade cannot be detected, so SSL readings on a treadmill may be less reliable.[2]

When SSL Is Measured

SSL is computed only during steady running. The metric is suppressed during walking, very low-speed running, sharp turns, and highly variable terrain such as technical trails, where the underlying stride model is unreliable.[2] SSL data fields display "--" or no value when the metric is not being computed.

Relationship to Running Economy

Step Speed Loss is one of several inputs Garmin uses to compute Running Economy, its higher-level efficiency metric introduced alongside SSL on the Forerunner 970. Running Economy estimates how efficiently a runner converts physiological effort into forward motion, similar to a vehicle's fuel economy.[4] Lower SSL contributes to a better Running Economy score because less of the runner's energy is wasted reversing direction at every step.

Hardware Requirements

Step Speed Loss requires:

  • A compatible Garmin watch. SSL launched on the Forerunner 970 in May 2025 and has since rolled out to the Fenix 8 AMOLED/Solar series, Fenix 8 Pro, and Enduro 3 via firmware updates.
  • A HRM 600 chest strap heart-rate monitor (US MSRP $169.99) — the older HRM-Pro Plus and other earlier straps do not support SSL.

The HRM 600 contains the accelerometer-based stride sensor that captures footstrike-level speed data. Without it, the watch can still measure traditional Running Dynamics metrics such as cadence and Ground Contact Time, but not SSL or Running Economy.[3]

Viewing Step Speed Loss Data

SSL and SSL% can be displayed on the watch as live data fields during a run, or analyzed post-run on Garmin Connect:

  • On the watch — add Step Speed Loss and Step Speed Loss % as activity data fields on supported running profiles
  • Garmin Connect — time-series chart of SSL and SSL% during the activity, alongside other Running Dynamics metrics
  • Trends — track average SSL and SSL% across multiple runs to monitor form changes over time[2]

Limitations

  • Hardware-gated — requires a HRM 600 purchase ($169.99 USD) in addition to a compatible watch[3]
  • Flagship-only — currently limited to Garmin's top-tier multisport line (Forerunner 970, Fenix 8 family, Enduro 3); mid-range watches such as the Forerunner 570, Forerunner 265, and Venu 4 do not support SSL even with an HRM 600 paired
  • Steady running only — not computed during walking, sprints, or technical terrain
  • Treadmill grade not detected — readings on treadmills may be less reliable than outdoor runs[2]
  • No chest-strap-free alternative — wrist-only optical sensors cannot derive the required footstrike-level speed data

Watches with Step Speed Loss

Watches with Step Speed Loss

Compare all watches with Step Speed Loss →

See Also

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 "Step Speed Loss". Garmin Technology. Retrieved May 2026
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Billy Grenis."Understanding Garmin's Step Speed Loss (SSL) Metric". Garmin Rumors. May 20, 2025. Retrieved May 2026
  3. ↑ 3.0 3.1 3.2 "Running Dynamics on Garmin Watches". Garmin Customer Support. Retrieved May 2026
  4. ↑ "Running Economy". Garmin Technology. Retrieved May 2026
Garmin Wiki
A project by GarminRumors.com